- This forum has 136 topics, 790 replies, and was last updated 1 year, 1 month ago by .
-
- Topic
- Voices
- Last Post
-
- Rocker Cover Gasket Anyone got a spare please?
- 3
- 15 years, 10 months ago
- alternator I believe I read that the early z750s had a problem with their rotor/stator setup, any info about p…
- 2
- 15 years, 10 months ago
- Tip required Anyone have any tips for getting the cover plugs off the centre 4 head studs?
- 5
- 15 years, 10 months ago
- Routine Maintenance I had a go at some quick routine lube ups today. Swing arm grease nipple, what’s the idea of …
- 2
- 15 years, 11 months ago
- OIL LIGHT PLENTY OF OIL IN THE ENGINE BUT THE OIL LIGHT KEEPS COMING ON????? thoughts please.
- 3
- 15 years, 11 months ago
- no lights while out playing on the devon bike noticed the indicators had stopped working,checked the lights a…
- 5
- 15 years, 11 months ago
- need a new coil????? Not sure the coils the problem there mate. Exactly how are you testing it? Are you using elecrtic s… 1 2
- 5
- 15 years, 12 months ago
- devon twin got a good spark, got new plugs,got new petrol,charged battery,checked with man in devon that nothi…
- 2
- 16 years ago
- boring wisco pistons,i used them on a 73 kwak 500 triple,well made but a bugger to find now
- 1
- 16 years ago
- Dont forget the sump filter! How do you get at this filter?
- 2
- 16 years ago
- chopping back end. Laudanum is the man to speak to, he has extensive knowledge in these things, well according to him …
- 3
- 16 years, 2 months ago
- Fuel Starvation? You seem to have covered most possibilities, the petcock, and float bowls. It’s possible you …
- 5
- 16 years, 2 months ago
- Starter Clutch (teach me to suck eggs) when sitting on the bike the starter clutch is behind the lefthand engine cover. Remove the gear le…
- 4
- 16 years, 2 months ago
- Have a good one everyone. have a good trip and try to come back with a twin 😀
- 2
- 16 years, 3 months ago
- front brake master cylinder testing or you could just use a big fecking anchor
- 4
- 16 years, 3 months ago
- You must be logged in to create new topics.