What’s that about 2 steps forward and 10 back ???
The primer surfacer HAS reacted – I can only assume with the original rattle can primer I sprayed. Good job it was before I sprayed the yellow top coat !
Desperately need the cups that go on the end of the swing arm to retain the grease on the spindle. They are also acting as spacers.The seals are not a problem as I have GBFO box of assorted seals going from tiny to huge.
Still NOT resolved the fork top nut situation yet – really bugging me now.
However, the good news is my lateral thinking with the dust caliper seals worked ! A pal gave me a handful of Escort rubber valve stem seals – perfect.
If you had to buy – about £4 for 10 !
