Reply To: front brake master cylinder testing

Home Forums All Things 750 Twin Technical Garage How To Fix It front brake master cylinder testing Reply To: front brake master cylinder testing

#6826
speedy
Participant

💡 one little tip is when changing your brake pads instaed of forcing the pistons back and pushing the fluid back into the master cylinder undo the bleed nipple first then push the pistons back then tighten the bleed nipple back up while holding the pistons back

then refit your new pads pump the pistons out and top up your fluid level a small amount of bleeding maybe required but the risk of twisting the master cylider rubbers is reduced and your putting fresh brake fluid in which on most bikes should be done as periodic maintainance every two to three years anyway


Share this