- This topic has 11 replies, 8 voices, and was last updated 11 years, 10 months ago by
.
-
Posts
-
Now there’s a challenge. These are very hard to get hold of especially ones in good condition. It might be easier to get a set made in St/St. I believe they arn’t that expensive either. I know philpass had some done and i think scavpan might know someone too. Im sure they will be along shortly
KK
In Germany we have to pay around 250,- Euros for a pair of individual down pipes in stainless steel.
There is a company named MAB, they are real specialists in doing exhaust pipe work.
http://www.mab-power.de/start.htmlWe are looking to have a small series of downpipes manufactured there.
Discussion is about 2-in-2 or 2-in-1 system.
Pipe diameter can be 35mm, 38mm, 40mm, 45mm or larger. Bending radius is fixed to 70 mm.
Individual downpipes can be made, but they need a sample or a CAD file to produce that.Some initial cost about 500,- Euros must be covered, if we look for a small series.
Cheers, Michael
I have one quite good right side downpipe from my B1, attached to a very poor condition original silencer, if anyone is interested.
there a bloke in Castleford who makes stainless exhausts called baz,will post number when I find it or try alden exhausts in Lincoln area,they advertise in classic motorcycle mechanics
Where is Laudanum when you need him?
He has pipe benders and the skills to do this. I’ll have to try to raise him on Facebook.Hi Dudes
I’m in the process of getting a fair few of these downpipes made at present, if you give me a few more weeks, I will give you some prices eiter in S/S or mild steel, whichever floats ya boat!
Regards
Scavpan
- You must be logged in to reply to this topic.
