- This topic has 2 replies, 1 voice, and was last updated 16 years, 3 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Home › Forums › The Trading Post › Bike Related Sales and Wants › DIY HARD TAIL FRAME FOR PARALLE TWIN
No good for a zed 750 twin lump the bottom frame rails are bent to be too close together to get the sump between them and if you sat it high enough to clear
them the head wouldn’t fit under the top tube, you’d have to split the bottom frame rails and splay them out.
😀 yes but its in kit form so it comes as a bag of tubes and bits so you can make any mods you need before you weld it up bud 😆