gs inlets

Home › Forums › The Trading Post › Bike Related Sales and Wants › gs inlets

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 1st March 2008 at 2:08 pm #4595
    philpassingham
    Participant

    Item number: 270214601520, these are good if you want to usr gpz500 carbs, need spacing out by 5mm from the head 😀

    1st March 2008 at 3:36 pm #6383
    Laudanum
    Participant

    oop, best be buying some of them then!

    2nd March 2008 at 4:01 pm #6384
    Laudanum
    Participant

    Hurray the inlets are mine! Now whats this about spacers and whatnot phil, also I reckon I could knock the emulsion tubes out and line bore the carbs and rubbers out to 38mm, anyone tried this?
    Failing that would it be worth tapering the spacers out from 36 to 38mm so there isn’t a step where they mate up with the head?

    2nd March 2008 at 5:30 pm #6382
    philpassingham
    Participant

    cant say mate. i found the linkage fouled the back of the head 😀

    2nd March 2008 at 7:16 pm #6385
    Laudanum
    Participant

    I feel a dose of linkage shrinkage coming on.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Share this