BiqueToast

😆 have a good one bud 😆

💡 one little tip is when changing your brake pads instaed of forcing the pistons back and pushing the fluid back into the master cylinder undo the bleed nipple first then push the pistons back then tighten the bleed nipple back up while holding the pistons back

then refit your new pads pump the pistons out and top up your fluid level a small…[Read more]

😈 micro valves on a four but what is more suprising is that it was running four teeth retarded so the piston was half way up on the exhaust stroke before the valve opened and halfway down the cylider on the induction stroke before it closed so half the new air/fuel mixture went down the bloody exhaust 😯

😆 😆 😆 stag night did someone say stagnight im in 😆 😆 😆

😈 took the bike to the shop to have the new adjustable cam wheels fitted so that i could drag a few more ponies out of the 997 zx lump

the next day the mechanic rings to ask if i had had the engine running which was a bit puzzling as i had took it for its mot at the same place two months earlier anyway cut a long story short the exhaust…[Read more]

💡 of course the other problem is as KK find out when thay dont snap thay come lose and start to wear down as thay contact the alloy casing high tensile will probley cutt through the alloy as will stainless

💡 trichlorothane 111 is an excellent industrial degreaser and with hind sight yest high tensile steel bolts would be better than stainless steel must have got my wires crossed with KK when talking about casing bolts

high tensile steel bolts are available in any shape or form size pitch thread and so on and so forth we have a very good…[Read more]

😆 wheres the 26Kg of french fries on the other plate 😆

💡 try using loctite 571 this is super stong stud lock kaptin did you replace your bolts with stainless steel ?

😆 LTD or CSR wanted in the new year running project concidered

😀 so this is the new home well lets keep the faith im in the market for another LTD/CSR next year which is actually only 18 days away but what the hell the prices will be down soon

may even concider a running project 90% complete