Re: Re: Just a Re-Commission

[Mikeonabike]

Well back to it after a 9 week brake, bit of a problem getting the rear brake to master cylinder to bleed, I had rebuilt it so I knew it was Ok, tried pressurising the reservoir from the top but that didn’t work very well so I connected up the calliper and put a rubber pipe onto the bleed nipple and pumped air in from a foot pump which went right back into the reservoir above the oil, releasing the pump sent brake fluid down the pipes like a rat down a drain pipe!!
I do not recommend anyone ever does this as there is a possibility the master cylinder could explode.
All that is to do now if fit the fuel tank, seat, side panels and sort out the exhausts.
It could be MOTd by the end of the week 🙂