Andy1198

Thank you, stalled a bit at the moment though

Decided to go with a z650 tail piece, new led headlight, digital rev counter, KTM 4 piston brake caliper, rear sets waiting for the rebuild, plenty more to do with the mock up before a strip & paint/powder coat.

That tail piece was from a Z900/1000 not a 650.

Here’s some pics of the bike with a z650 seat & tail piece

I keep posting pictures but get error messages every time I try. I think I’ve got a work around for it now, I can see the pics on the forum

Andy

Went with a Zephyr 750 swinging arm, fairly straight forward to fit, had to cut 6mm a side off the width of the arm to fit in the frame, need to make some top hats to suit the swinging arm bolt that goes through the frame.

Put the wheel in to see how a 150 rear tyre will look, still want supermoto style wheels. Next up is an USD front end.

Supermoto wheels in for mock up, still not sure about what front forks to use.

Apologies if I’ve posted loads of the same pictures, been getting some jargon saying the post hasn’t been submitted & when I look, I can see that teh pictures are on the forum.

Anyway, went with a Zephyr 750 swinging arm, just needed 6mm off each side of the arm where it fits in the frame, got to make up some top hats so the bush sits on the bolt…[Read more]