@andyfme
Active 1 month, 1 week ago-
Andyfme posted a new activity comment 2 years, 6 months ago
Hi Can you help me with a problem with exhaust popping,it’s only happening in the right pipe at idle and when throttling down,it was blowing at the headers but replaced exhaust rings seals and know seems pretty tight,has electronic ignition fitted and headed pipes from yourself,starts on the button or from kick,idles,pulls like a train and has…[Read more]
-
Andyfme posted an update 2 years, 7 months ago
@kaptainkwak Hi will a starter motor refurb kit for a 77 B2 fit a 79 B4,cause it’s knacked and it’s the only one I can find.
Many thanks-
Hi Andyfme
Al models of the 750 twin use the same starter motor so the answer to your question is yes. However if you look on he forum one member (AndyMase) has just had his starter motor refurbed for £60 which even with postage is cheaper than the refurb kits I have seen around.
Cheers
KK-
Hi Can you help me with a problem with exhaust popping,it’s only happening in the right pipe at idle and when throttling down,it was blowing at the headers but replaced exhaust rings seals and know seems pretty tight,has electronic ignition fitted and headed pipes from yourself,starts on the button or from kick,idles,pulls like a train and has…[Read more]
-
Hi Andy
That problem would suggest an air leak. Have you checked the carb to head rubbers? Start the engine and get it to tick over level. Place your hands under the carbs and lift them up the push them down. If the tick over changes then you have a leak with the inlet rubbers. That can be 3 things:
1. Perished rubbers – Replace rubbers, don’t try…[Read more]
-
-
-
-
Andyfme posted a new activity comment 2 years, 8 months ago
Hi Apologies my fault I had a hyphen where a full stop should be,check it now
-
Andyfme posted a new activity comment 2 years, 8 months ago
Payment sent PayPal with thanks
-
Hi Andy
Just to let you know the money hasn’t arrived yet. It’s normally instant with paypal. Can you check the email you sent it to?
Cheers
Andy
-
Hi Apologies my fault I had a hyphen where a full stop should be,check it now
-
-
-
Andyfme posted an update 2 years, 8 months ago
Thanks, have ordered header pipes,please include collets and clamps and Bill me for full amount
Regards Andyfme-
Hi Andy
Thanks for the order.
I will combine the postage so the total will be £325.
You can pay via bank transfer (preferred) or paypal.Bank
10043868
166-29-20Paypal
andy.eaton58@gmail.com – mark as family and friends so I don’t get chargedI will get the parts together ready to send.
Thanks again
Andy
-
Payment sent PayPal with thanks
-
Hi Andy
Just to let you know the money hasn’t arrived yet. It’s normally instant with paypal. Can you check the email you sent it to?
Cheers
Andy
-
Hi Apologies my fault I had a hyphen where a full stop should be,check it now
-
-
-
-
-
Andyfme posted a new activity comment 2 years, 8 months ago
Hi how much are the stainless steel downpipes,including p&p to London address? I take it this is chromed S/S and will not discolour will use?
Also do you have the exhaust clamps and split collars??
With thanks Andyfme-
Hi Andy
The exhaust downpipes are in the shop at £295 inc UK postage. They are polished stainless steel not chromed. Sorry I don’t have new collets and clamps but I can supply used ones at £35 posted.Cheers
Andy
-
-
Andyfme posted a new activity comment 2 years, 8 months ago
Thanks for the reply was beginning to wonder what I had done wrong!! Now I know?
Anyway I saw rode ,and brought the bike,a 1979 B4 with a replacement engine with 15000 on it,looks ,rides and stops great, has Z1 paint work!
She’s a beauty,bad side haven’t got it yet (courier)
And has a lazy starter motor,or as I am already learning may have a…[Read more]-
Congratulations. I would start with a refurb of the starter motor. Give it a good clean out paying good attention the rotor pick up gaps. Also check the cable contacts are clean. I am now supplying stainless steel downpipes or even complete systems if your interested. Cheap in comparison to other bike systems but sadly not pennies. The beauty is…[Read more]
-
Hi how much are the stainless steel downpipes,including p&p to London address? I take it this is chromed S/S and will not discolour will use?
Also do you have the exhaust clamps and split collars??
With thanks Andyfme-
Hi Andy
The exhaust downpipes are in the shop at £295 inc UK postage. They are polished stainless steel not chromed. Sorry I don’t have new collets and clamps but I can supply used ones at £35 posted.Cheers
Andy
-
-
-
-
Andyfme posted an update 2 years, 9 months ago
Hello to all,I am a new member to the lonesome twin,have been a kawasaki rider a long time,am going to view a Z750 B4 on firday!! It runs and stops and seems from the pics to be in good condtion ,the owner informs me it has a lazy starter,and a reconditioned replacement engine,wh is wired up through a modern reg/recifer.
Is there any particular…[Read more]-
Hello Andy
Firstly let me welcome you to the website.
Unfortunately you have posted this in your personal area and not the forum. This means that it will only be seen by people who view your profile and not everyone.
Looking at the date you posted this you will already have been and viewed the bike. If so how did it go? Apart from the obvious…[Read more] -
Thanks for the reply was beginning to wonder what I had done wrong!! Now I know?
Anyway I saw rode ,and brought the bike,a 1979 B4 with a replacement engine with 15000 on it,looks ,rides and stops great, has Z1 paint work!
She’s a beauty,bad side haven’t got it yet (courier)
And has a lazy starter motor,or as I am already learning may have a…[Read more]-
Congratulations. I would start with a refurb of the starter motor. Give it a good clean out paying good attention the rotor pick up gaps. Also check the cable contacts are clean. I am now supplying stainless steel downpipes or even complete systems if your interested. Cheap in comparison to other bike systems but sadly not pennies. The beauty is…[Read more]
-
Hi how much are the stainless steel downpipes,including p&p to London address? I take it this is chromed S/S and will not discolour will use?
Also do you have the exhaust clamps and split collars??
With thanks Andyfme-
Hi Andy
The exhaust downpipes are in the shop at £295 inc UK postage. They are polished stainless steel not chromed. Sorry I don’t have new collets and clamps but I can supply used ones at £35 posted.Cheers
Andy
-
-
-
-
-
Andyfme became a registered member 2 years, 9 months ago
Hi Andy
That problem would suggest an air leak. Have you checked the carb to head rubbers? Start the engine and get it to tick over level. Place your hands under the carbs and lift them up the push them down. If the tick over changes then you have a leak with the inlet rubbers. That can be 3 things:
1. Perished rubbers – Replace rubbers, don’t try…[Read more]