[Gaz]

Try Reproduction Decals in Canada, I have bought a fair bit of stuff from them for other bikes,including tank and sidecover badges and pinstriping for the 750.

Cheers
Gaz

[Gaz]

Thanks,those guys don’t have that part- out of stock. I was told by a parts guy in the US that kits were never made, it seems that he may be correct, however a brake parts supplier suggests that I measure the cup and he may be able to supply one. In the meantime I have purchased a S/H rear master cylinder from the US.

[Gaz]

I have found a 2.25 shim in Holland and it is on its way to Oz, that is the last one required and will get the bike on the road again. Thanks for the offer of help.

Gaz

[Gaz]

I am having trouble getting a 2.25 part# 12037-052. Z Power UK has them but will not ship to Australia. Would be happy to pay all costs if someone would help me get one out here.
Cheers.

[Gaz]

I have once again got the stuff from the U.S. of A. However I have found a Kwaka dealer here in Perth WA that does an exchange on the shims at $10 ea. I am so used to getting on the net that I forget to try the locals.

[Gaz]

Thanks Philpass, is there somewhere in UK that I can get them?

Gaz

[Gaz]

According to my missus it’s four bikes too many.

[Gaz]

I took the bike on a Classic Motorcycle club run Sun 5/12, the bike performed faultlessly and was very impressive for the 350km trip.
Handles very well and 18km per litre. Thought I might show you it’s big brother.

[Gaz]

I will ride to the local , show off the bike and take the advice of your smiley.

[Gaz]

Hi z76,
Welcome to the site, there are a couple of us here in the west, I have just completed a mainly cosmetic rebuild of a B2 and am very impressed with the bike.I have had help from the guys on this site and have sourced a lot of parts from US, UK and Canada. There isn’t that many 750s in Oz but watch ebay, they do come up occasionally.

Gaz

[Gaz]

That link comes up as an error

[Gaz]

Will look at that.
Cheers
Gaz

PS Did pick them up $15 US landed in Oz

[Gaz]

Thankyou,
After running the bike I found the head gasket weeps a bit,if I am going to replace it I thought I would do pistons, rings, valves etc.I can get std. pistons from the US very reasonable.
Gaz

[Gaz]

Hi dougyt,
Any chance of getting this article scanned and emailed to me, we don’t seem to have that mag out here .
Thanks
Gaz

[Gaz]

Thanks, a lot of the the old road tests were unkind to the bike and as such did not expect too much, however I am very impressed, it is as good as my ’66 Trophy – better in many areas, and I do love that Trophy.
Gaz

[Author]

Posts