beachcomber

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 384 total)
  • Author
    Posts
  • in reply to: B2 "Hubertus" restoration and slight modification #24734
    beachcomber
    Participant

    Nice work Michael …. I can’t wait for my pal to return in march so I can get on with my project !!

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #24681
    beachcomber
    Participant

    been away on the sick list for a couple of months – but back to it now. Finally found someone to weld my exhaust and alloy fuel cell up ! That’s the last ballache job that I can’t do myself. When my pal Brian gets back from his jaunt to the US we can get stuck in. Still trying to get hold of the Dynatek DARC-2 ignition module with built in retard. No point running the Nitrous without …. unless I have an endless supply of pistons.

    Clutch springs – still have a few sets left.

    Engine studs – little interest in the Gold pass version – so I’ve ditched that idea. They will come in factory Black They look the bollox anyway. Pix coming as soon as I find the safe place I put it !!

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #24437
    beachcomber
    Participant

    Clutch springs are being posted as we speak. If anyone wants sets. please let me know.

    I received a sample set of the studs last week for approval. They actually look the biz in the Black finish, so I might leave a few sets [ 25% ? ] in Black in case anyone wants a “traditional ” finish as opposed to a “Hi-Po” look.

     

    After next week I will be putting ALL the items on E-Bay and other forums.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #24425
    beachcomber
    Participant

    Clutch springs are being collected on Tuesday – please let me have your final orders.

    in reply to: Hello from Iowa USA #24305
    beachcomber
    Participant

    Hi Shannon, welcome along to the group. You’ll find a shed load of interesting info, magazine articles etc. You’ll never be bored !! TJ [ Glemseck / Tangerine Dream ]

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #24304
    beachcomber
    Participant

    <div class=”postarea”>
    <div class=”post”>
    <div id=”msg_911292″ class=”inner”>And finally, progress on the bike !!!! A pal came round tonight and tacked the exhaust up so that it could be taken off to be sent out for welding / polishing. Looks the biz.</div>
    </div>
    <div>Doohhh – took it off and in my car before I remembered we hadn’t taken any pix !!!!!!</div>
    Modify message</div>
    <div class=”moderatorbar”>
    <div id=”modified_911292″ class=”smalltext modified”></div>
    </div>

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #24277
    beachcomber
    Participant

    Thanx for that Andy ….. anyone else?

    On the engine studs, there are currently FIVE sets left. If you want them , let me know otherwise it will be the next order.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #24245
    beachcomber
    Participant

    Update – I collected the clutch springs from the manufacturer today. Off for passivating next week.

    Anyone still interested please let me know and also how many sets.

    The engine studs will be put into CAD next week and a production slot allocated ASAP.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #24218
    beachcomber
    Participant

    Thanx KK for clarifying. YES I could have done the greedy bastard job and charged £150 +, but this is an exercise to help my fellow 750 owners – as are the clutch springs.

    Going rapidly …. at this rate I might have to place another order !!

    Anyone know FOR DEFINITE the lengths of the Z1 studs ? It’s fairly obvious I have at least half the set required !

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #24213
    beachcomber
    Participant

    To be clear – the kit is for EIGHT studs an EIGHT nuts all gold passivated.

    The manufacturer’s have now informed me that the price they quoted was EXCLUSIVE OF VAT.

    That means I have to pass that on …. 5 sets and or club price will be £62.40 and retail £78.00.

    However I think that compares favourably with the OEM price for standard studs and nuts.

    At this price it should be a no brainer to replace them when re-building an engine …. cheap insurance.

    The order has now been placed and production run is in 2 weeks.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #23925
    beachcomber
    Participant

    Thanx KK – back from my chill break now ….. wish I was back there !

    The manufacturers have confirmed that the specs are as the APE parts ….. only difference – about£180 !!!!! Most of that is in Freight, duty, VAT etc.

    The nuts are NOT domed as the APE versions, but if future orders come in I can contemplate ordering specific nuts. Grades are the same – just cosmetics. As the parts will be Gold passivated, further protection from any potential corrosion. BTW all you other guys – only 5 sets left now from the first batch.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #23838
    beachcomber
    Participant

    I forgot to mention that any club members will buy at the 5 + price … that is £52 for a personal set.

    If anyone is interested I will need firm orders by the end of this month – production will begin in September.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #23834
    beachcomber
    Participant

    Prices now in

    Kit comprises 4 x 190mm studs
    4 x 180mm studs
    8 x flanged nuts [ not domed ]

    All 10.9 grade material Gold passivated.

    Kit price £65.00 retail and in orders of 5 sets – £52 per set.

    Forget CORROSION
    Forget Stretching
    Will help to eliminate head gasket issues.

    I will be placing the first order with RAM when I return from my chill break to Alsace [ 15th October ]

    Strictly first come first served as I already have 8 sets sold [ 12 left ].

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #23832
    beachcomber
    Participant

    Good response from the RAM stud manufacturers.

    They will produce suitable studs in the correct lengths to the same spec material as APE with suitable flanged nuts [ NOT domed ].

    Initial discussion is good and the cost is likely to be almost 40% cheaper than the cost of importing the APE product [ $138 + shipping, duty and VAT.].

    Of course we then have NO shipping and duty to pay – only VAT.

    The only bad [ ? ] news is that I must order 20 sets.However when I see the bad condition of the standard OEM studs [ corrosion + stretching ] these would be an almost essential part of even a stock rebuild.

    Final prices when I return in 2 weeks from a chill trip to Alsace.!! 😉

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #23819
    beachcomber
    Participant

    More good news – there might be a “plan B” for the Hi-Po studs / nuts for the UK / EU.

    The company that makes the high performance studs for the RAM C Type Jaguar replicas says he can make our studs to the same specs as the APE items.

    I have sent him the details to get a price based on 80 [ 10 x sets ]. This is the minimum quantity to get a good price.

    The VERY good news is that they are manufactured here in the UK …… no silly carriage costs, no VAT and no customs duty ! That will save approximately 40% on the costs. AND they will be available to call off with a 2 week lead time.

Viewing 15 posts - 16 through 30 (of 384 total)