beachcomber

Forum Replies Created

Viewing 9 posts - 376 through 384 (of 384 total)
  • Author
    Posts
  • in reply to: Flat Tracker project #10045
    beachcomber
    Participant

    Wow,

    lots of side issues since my last post – ill health, dog’s ill health [ cancer – now sorted ], passing of close family member, loss of phone line and finally major computer virus !!

    Howeevr, work has been continuing – if a little slowly. Frame is now rebuilt with new top rails and cut ‘n shut ready for blasting and painting. Wheels are almost [ ! ] prepped ready for blasting and powder coating. Came to the swingarm – and it’s in a bad state [ rustwise ] and probably beyond salvation. Any alternates ?

    in reply to: Flat Tracker #10144
    beachcomber
    Participant

    Another small piece today – I got an SU electric pump from a late model [ relatively ! ] Mini. Nice and compact and more than enough oomph for the Weber.

    I’ve ordered some “dry sand” from a builder pal of mine, and I’ll be trying out my new Sand Blasting equipment after Christmas.

    £80 for the Blaster ……….. about £350 – £400 ‘s worth of shotblasting required for my projects – no contest.

    Apparantly, it will also handle Soda ……….

    in reply to: Just moved in #10060
    beachcomber
    Participant

    KK thanx for the welcome [ and others ].

    I’m certain that with the specialised knowledge hereabouts that I will be able to get my Flat Tracker project finished early next year.

    I will certainly need help with the wiring – the loom on the bike was scrap !

    I keep looking at the frame and swing arm – and wonder if I wouldn’t be better off starting with a frame in reasonable condition – Mine has quite bad surface rust, and of course the chopped frame rails have to be replaced.However, that’s a relatively small point as a good shotblasting will no doubt sort that out !

    In reality the only major outlay left is the stainless high level exhaust and the welding up of the Weber intake – I have pretty well most of the other parts needed.

    BTW – due to the particularly violent shade of Yellow I intend to use, I’m naming the bike “Not so Mellow Yellow”. It follows on from my Porsche 356 California Speedster [ replica ] of the same name.

    in reply to: Flat Tracker #10143
    beachcomber
    Participant

    Ah, I have it now Michael !!!

    If push comes to shove I’ll adapt a fitting from one of my other projects.

    The pump actually acts as a valve – as no fuel passes until it is switched on. But you are quite right – I still need some means of removing the tank from the bike !!

    in reply to: Flat Tracker #10142
    beachcomber
    Participant

    Michael,

    just read your tank advice again …………. don’t need a prime or vacuum facility as the Weber will be fed via an SU electric pump.

    in reply to: Flat Tracker #10141
    beachcomber
    Participant

    Thanx for the headsup on the tanks Michael. Do you have any pix ? As you can tell – I am new to Z750 models.

    BTW – I am only in Reichenau April / March and August – and sometimes October for our village beerfest !

    in reply to: Just moved in #10059
    beachcomber
    Participant

    Hi Michael,

    what part of Germany ?

    We have a place in Reichenau [ot Haselbatchtal ] – 30 kms North of Dresden.

    We have a Pig Roast / BBQ for our German biker friends there in late August.

    in reply to: Flat Tracker #10140
    beachcomber
    Participant

    Bit more of the puzzle. Here’s the flanges I had lazer cut for the Weber 40DCOE conversion – had to have 3 lots done to get a good price ! Just waiting for the aforementioned “tame welder” to turn up [ and get some tubing ] to get the manifolds welded up.

    Here’s the exhaust stubs that Hoggy made up for me [ thanx mate ]- just need some stainless pipes made up now to complete the look I’m after -the BSA Spitfire scarmbler.

    The bike had been “chopperised” [ badly ], but I’ve now got new frame tubes to weld in place.

    Is there a smaller “peanut” style tank from any other models that will fit ? I’m looking for something like the Bonnie export tank [ 3 gall ].

    The wheels will have to wait until after Christmas now as the powder coater is closing down for the holidays next week.

    in reply to: Flat Tracker project #10044
    beachcomber
    Participant

    Yes that’s what I thought when I saw it – for the first time [ bought sight unseen ! ]

    However, it was very cheap [ £120 ] and despite the looks, the mechanical parts were all in good condition and the engine had an overhaul 500 miles before it was abandoned.

    Rather than take up space here, I’ll log progress over in the relevant thread ……….

    2 hours after the first pic – just getting an idea on the direction of the build.

Viewing 9 posts - 376 through 384 (of 384 total)