beachcomber

Forum Replies Created

Viewing 15 posts - 361 through 375 (of 384 total)
  • Author
    Posts
  • in reply to: Flat Tracker #10151
    beachcomber
    Participant

    KK,
    I’ll be modding the wiring loom as I’m running a daylight MOT. How much please ?

    in reply to: Flat Tracker #10150
    beachcomber
    Participant

    That is to say _ NEED a wiring loom !! Any offers ?

    BTW – this is the overall image I’m going for

    in reply to: Flat Tracker #10149
    beachcomber
    Participant

    wiring loom in the not too distant.

    I’ll be modding it anyway as I’m going for a daylight MOT – just a stop light.

    FINALLY got the rear brake torque arm off !! Appears [ front end ] that as you undo the bolt it tightens up against the torque arm – and seizes ! Spent a frustrating hour or so of my life on that…….

    For those that have showed an interest in the Weber conversion – I have a guy who will be giving me a quote to build up the manifolds. He’s away on business at the moment, but will give me a price when he gets back.

    in reply to: Flat Tracker #10148
    beachcomber
    Participant

    Finally cleared enough space in the garage to mock up the frame, tank, seat.

    I’ll make some patterns for the racing number side panels and the underseat electrics tray / mount in the next few days – then it’s off to the shotblasters with the frame, swingarm and side stand.

    in reply to: Flat Tracker #10147
    beachcomber
    Participant

    OK – got the right thread now – I think !

    I’ve had over a dozen enquiries for the Weber / Dellorto conversion manifold now – so I’ll make some proper enquiries as to multiples of lazer cut flanges, tube, fabrication etc., and see what the costings are.

    in reply to: Flat Tracker project #10054
    beachcomber
    Participant

    The great thing about Webers / Dellortos / Solex carbs of this style are the ease of tuning and loads of spares at reasonable prices. Also loads of carbs around – £50 – £100. Also they don’t need individually setting up as twin carbs.

    There is also a good range of choke sizes around what we need for these bikes of ours. Typically 38mm or 40 mm chokes would be good. As far as I’m concerned that is one more part on the bike which is “future proofed” – knowing I can always get spares, jets, etc. They’re also damn good carbs !

    My problem [ one of them ! ] is although I am an auto engineering designer with many auto designs to my credit – I am NOT a welder / machinist. That is to say I can stick two bits of metal together – but it’s not pretty ! I’d rather leave that to the experts.

    in reply to: Flat Tracker #10146
    beachcomber
    Participant

    Just realised that I’m duplicating posts – sorry about that – suitably flogged with a worn Renolds chain …………..

    in reply to: Flat Tracker project #10053
    beachcomber
    Participant

    Thanx Michael – I should point out that I AM the original computer dummy !!!

    in reply to: Flat Tracker project #10052
    beachcomber
    Participant

    Here’s the carb flanges and Weber mock up – if pix pransfer this time !

    DougyT – I’m doing exactly what I do on 5-6 other forums – not downloading ? Is it a different system on here ?

    Thanx DougT / Michael – now sussed !! See following post.

    in reply to: Flat Tracker project #10051
    beachcomber
    Participant

    Hey Phil,

    the pleasure was all mine – thanx for putting yourself out.

    I’ll dig out pix etc. Don’t know the final cost yet. I had to get 4 carb sets lazer cut [flanges] to get a half decent price.

    I have to get them made up into manifolds – no big deal [ if you can weld ! ] so the additional cost will be whatever the guy charges me for the welding.

    I’ll dig out the invoics for the flanges and get the price per set. I’ll just put 10% on for my running around etc.

    Thanx again

    in reply to: Flat Tracker project #10050
    beachcomber
    Participant

    Phil – ending up going both days !!

    can you let me know how much you want for the s/a please and I can raid my piggy bank.

    TJ

    in reply to: Flat Tracker project #10049
    beachcomber
    Participant

    Hi Michael,

    I’d love to joining my German cousins – as you know [ ? ] I have a place in Saxony [ Reichenau ].

    I’ll try again now my PC is fixed [!] and see how I get on.

    Thanx for the headsup

    TJ

    in reply to: Flat Tracker project #10048
    beachcomber
    Participant

    Thanx for the kind thoughts ………. the passing of my MIL hit me real hard – not yer average witch of a MIL, but a real friend and only 6 years older than myself [ Mrs. B is a lot younger than me ! ]

    After the last year I had including visiting the vets every TWO days to have the dog’s wounds redressed [ 6 months ] – I really did say “why me !!!”

    Anyway – all that behind me now and forging forward with my 3 projects – BMW Kay Fighter, Yamaha TR1 Vindicator Cafe Racer and of course the KZ.

    Plenty of pix, but on hold for publishing at the moment as I was on Photobucket when the virus struck my PC. Coincidence, when I had a virus 4 years ago – I was also on Photobucket at the time !

    Apart from money [ !! ] the only hold ups now are the Weber intake manifold and the high level pipes.

    I’m going for a Daylight MOT and I will be fitting Race style number plates side and front. Let’s see what’s at Stafford this weekend !

    BTW – having trouble registering with the German site ???????? Is that you Michael ?

    Here’s a pic of the modified frame. Instead of a traditional seat “hoop”, I’ll be making a tray [ 3mm steel ] where I’ll mount the electrics / battery and that will also act as an undertray for the XR 750 seat to seal out all the crud.

    in reply to: Flat Tracker project #10047
    beachcomber
    Participant

    Hey Phil.

    I’m supposed to be going Saturday !! But another pal of mine wants to go on Sunday – could be both days !!

    How much do you want? I’ll have to get some cash out.

    Many thanx

    TJ

    in reply to: Flat Tracker project #10046
    beachcomber
    Participant

    Michael / Phil,

    many thanx gents.

    Phil,please send me details. Michael – thanx but I fear the carriage would make a deal out of the question.

    I have the PC doctor coming today, and hopefully he can restore my main PC – and more important, retrieve the 1000’s of photos and documents – then we start again !

    After all the foregoing doom and gloom from last year / this year [ so far !! ]things were finally moving along with my bike projects all THREE ].

    Hopefully the wheels will be off for blasting and P/C next week.

    I have a pal who has said he will make up the Weber intake [ 40DCOE ]. I already have the flanges. The final expensive bit will be the exhaust. has to be twin high level pipes similar to the BSA Spitfire Scrambler / Honda Trailees [ CS ? ].

Viewing 15 posts - 361 through 375 (of 384 total)