Tango

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 677 total)
  • Author
    Posts
  • in reply to: Tangos B1.. The Next Step.. 🙂 #13267
    Tango
    Participant

    Hard to see… But it’s standing out to me!!

    DSC_0054.JPG

    in reply to: Tangos B1.. The Next Step.. 🙂 #13266
    Tango
    Participant

    Pmsl.. You are always the whip cracker!

    WhipKwak away..WhipKawk away.. WhipKwak Away!!!! 🙂

    I’ll try Buddy but not promising

    I’m having a little bit of trouble with a tiny bit of reaction in the paint!

    in reply to: Tangos B1.. The Next Step.. 🙂 #13265
    Tango
    Participant

    Well you will be glad to know.. That’s it off me today… Managed to get three coats of paint down on the tank and the tail piece. I have to let it bake off in the sun now for a few hours.
    Then it will need a fine 1200 grit or higher to Flat the paint off before either more paint or lacquer..

    _20160515_165130.JPG

    in reply to: Tangos B1.. The Next Step.. 🙂 #13264
    Tango
    Participant

    I Love this color.. It is very satisfying as it goes on..it sits really nice if you get it right, but it’s a pain in the arse when it starts to go wrong!

    Let’s hope it can keep going on like this!

    DSC_0045.JPG

    in reply to: Tangos B1.. The Next Step.. 🙂 #13263
    Tango
    Participant

    Let’s hope I can get the same colour and finish as I did last time. 🙂

    DSC_0044.JPG

    in reply to: Tangos B1.. The Next Step.. 🙂 #13262
    Tango
    Participant

    And done…

    _20160515_152112.JPG

    in reply to: Tangos B1.. The Next Step.. 🙂 #13261
    Tango
    Participant

    Time to get some primer on the tank while the going is good!

    _20160515_152151.JPG

    in reply to: Tangos B1.. The Next Step.. 🙂 #13260
    Tango
    Participant

    Getting close to priming the tank now!
    Fixed the small dent.. Should be a good enough fix I hope. 😉

    DSC_0040.JPG

    in reply to: Tangos B1.. The Next Step.. 🙂 #13259
    Tango
    Participant

    Well it’s a go with the Primer on the tail piece!…

    What a difference a Nice Sunny Day Makes!

    _20160515_143829.JPG

    in reply to: Tangos B1.. The Next Step.. 🙂 #13258
    Tango
    Participant

    Didn’t think I would be getting this far today, but I’ve just got some body filler in that small dent that was left. Hopefully I can get that rubbed down today and there is a small chance I could start getting some paint down?

    DSC_0038.JPG

    in reply to: fuel cock for B-models #12522
    Tango
    Participant

    No as you can see all is good with the fitment of a Harley Davidson 1975 – 1985 fuel tap, to the Petrol tank of a Kawasaki B1 750 Twin 😉

    DSC_0036.JPG

    in reply to: fuel cock for B-models #12521
    Tango
    Participant

    Ha Ha… Nothing like the Doubt of a master such as yourself Michael to spark a felling of…. am I right?… Was the research I did correct?… Will that petrol tap fit my tank??

    But I’m glad to say… Pffttt! I Never doubted myself for a second!!
    (I say that holding my head down looking sheepish!) 🙂

    DSC_0035.JPG

    in reply to: fuel cock for B-models #12520
    Tango
    Participant

    Look at this on eBay http://www.ebay.co.uk/itm/331655445929

    This could also be handy to have at the price of it.

    in reply to: fuel cock for B-models #12519
    Tango
    Participant

    I’ve tested it and it is correct.
    The filter mesh is a tight fit but I have had it in the B1 tank, so unless I come across any problem at the final hour. It should be straight forward.

    Let’s hope so shall we!

    If this proves a good mod… It is significantly cheaper than a stock replacement. I paid about £20 delivered off EBay for the one I have.

    in reply to: Tangos B1.. The Next Step.. 🙂 #13257
    Tango
    Participant

    Getting there it’s hard work but I’m sure it will be worth it in the end.

    DSC_0034.JPG

Viewing 15 posts - 61 through 75 (of 677 total)