Forum Replies Created
-
AuthorPosts
-
beachcomberParticipantBack at yer …………………….. that’s at least THREE of us who care. Hmmmm – a forum with 3 active peeps – that’s a Triumverate isn’t it ?
beachcomberParticipantHi Richh,
that’s perfect. I can collect no probs – unless you want to have a look at progress on the Glemseck project ! I’ll PM you with my phone #’s.
Thanx again
TJ
beachcomberParticipantHi Richh,
YES PLEASE !! A spare frame would be absolutely ideal to mock the blower motor up. As you will have read – the rolling chassis is now round at my pal’s – that’s great, but means there’s no ref point back in my shed for the blower set up. Depending on where you are I can collect, or probably good old Hermes is probably the best way. NO NEED to wrap / package – the last frame I sent just had some delivery labels attached. They do like any pointy out bits to be covered ! If that’s the way to go, I’ll send payment for carriage.
Also peeps I’m after a spare late bottom end. I’m collecting my late engine from KK in January, but with a blower AND nitrous I’m thinking a spare bottom end won’t go amiss !
Many thanx for the kind offer
TJ
beachcomberParticipantback at yer Phil ……………………… don’t know if anyone else is reading these posts ???????
beachcomberParticipantI bought the bends [ Stainless ] as “random bends” from a company on e-bay. I’ll dig out the link. They were not expensive – 6 bends of various radius’.
Unbelievably this mockup was fitted “out of the box” with no cutting / mods so far.
The top pipe needs to be about 2″ shorter where it enters the ex. stub and about the same where it goes into the collector [ another e-bay find ! ]. The cross pipe will need to be “cut and shut” – but nothing too difficult. The bends I have left over will get me there. I think the whole lot including collector was under £40.
I’m in need of another late engine BTW if anyone has a spare !
beachcomberParticipant
back to the main plot …… what a difference a day makes – or to be precise – half a day ! 
As well as the obvious progress in the pix, the blower manifolding / mountings have been worked out as well as the carb intake for the SU – which I guarantee will make you go weak at the knees !
. The exhaust has been swung over to the other side – and will also look the bollox.Also rough mounting points for the seat and “tank”. The seat is sitting 2″ high in the pix as it’s currently over the tie down straps. The Tarrozi fork brace is total bollox …………. nowhere near – after I had to order it specially – and of course pay a premium.
There is loads of room for the fuel cell [ under frame ] which again has worked out a treat. Room for TWO NOS bottles hidden under the “tank”.
A lot of other “whatif” ideas have also been crystallized.
Thanx to my pal Brian – who is barely well enough to move into the garage, never mind carry out the precision fab work.

-
This reply was modified 8 years, 11 months ago by
beachcomber.
beachcomberParticipantOver the past week I’ve been looking into the blower drive take off that I was contemplating – ie from the alternator fixing bolt [ 12mm ]. It’s the only logical / practical place, but I was concerned about the torsional shear stress on the fixing. The blower will take around 15 – 20 bhp to drive, but it’s the inertia that needs to be overcome that’s a concern. Soooooooooo – back to the turbo then !!! What’s that about ” I used to be indecisive – now I’m not so sure” !!
The blower set up is much more familiar to me, but I do not want to take the risk of a marginal drive output. So I will revert to using he same take off to drive the Gixer oil pump for the oil cooler and turbo feed. The only good news [ ? ] is that I spent some months thinking about the turbo set up and planning the packaging. One of the major benefits is the much lower weight and compactness.
The decision was finally declared a no-brainer when our pal Der-Nanno informed me that he’s found a carbon seal turbo for his TR1 project. Thanx mate ! That means I can use the SU carb I have in a draw through set-up and I already bought most of the ancillaries I will need – boost gauge, oil pressure gauge, oil lines and fittings, etc., etc. That makes the whole packaging much simpler – including manifolding, even my 2 > 1 high level exhaust will easily hook up to the turbo flange !
So that’s the current plan [ D or is it E ?]
Today I got most of the parts round to my pal’s garage and he was busy fitting up extra fluorescent lights. We got the frame unwrapped [ like Christmas ! ] and set up on the bench and even got so far as to install [ loosely ] the front and rear wheels so that we can take the measurements for the spacers. I’ve even found most of the scattered parts around my shed and am making a list of the other parts that I need – or need to find !
I hope to have the dummy engine installed this week as well so that we can start looking at the under frame fuel cell, turbo packaging [ AGAIN ] and etc.



beachcomberParticipantMoving news ……………. the bike ramp has been moved round to my pal’s garage and the frame / forks and wheels will be round there mid – week. I’ve already moved most of the parts – just the big parts to go next – fairing, seat, tank cover etc.
I’m keeping the blower parts in my shed as I’ll need them to mock up the mounts, manifolds etc. First job is to refit the wheels so that the spacers can be measured up and made. Hopefully that will be done before Christmas. I’ve been offered the use of another pal’s machine shop, where I’m hoping to get some head work done before Christmas. He’s away on a 2 week holiday and has given me the run of his facilities !
I’ve found the ideal unit for the 2 x retards needed for the blower and the Nitrous. Also shown is the crank trigger, although I have an idea the stock CDI from the late model engine can do the job – need to find out. As the OEM coils run a “wasted” spark system – I can just use two coils to operate the twin plug head, although a headsup from those that know would be great .
beachcomberParticipant
beachcomberParticipantShout out for Kenny ????? I lost all my contact info when my PC was “kidnapped” with that effing ransomeware earlier this year.
Kenny, been trying to find a contact for you.
I don’t want to abuse your good will, but I wanted to check that there is no issue for the continued loan of the engine parts I’m using for set up ?? You can no doubt see why I’ve been delayed in progressing thew project – but things are moving forward once more.
BTW – are you sure you don’t want to sell head / maybe barrels ?
The project should be in my pal’s garage in the next few weeks and then I have to set up the dummy engine again. That’s mainly to locate the blower and exhaust positions.
Again, my thanx for your generosity in loaning me these parts.
beachcomberParticipantHi Daniel ……. it’s good here !!!!
Where are you located ?
beachcomberParticipant
beachcomberParticipantRepeated here JIC
Ta
Anyone got / know where to get a fork brace ? The Glemseck IS starting to get really serious now .. talked to a pal today who has a 150 BHP Nitrous set up. Be rude not too ?
However in the interests of self preservation – fork brace and steering dampener now on the shopping list .
beachcomberParticipant
beachcomberParticipant<div class=”postarea”>
<div class=”post”>
<div id=”msg_886794″ class=”inner”>Have you noticed that life is full of “good news / bad news” moments !!!
The bad news is that the guy [ Dave, recovering from cancer ] who took over my old workshop unit and had offered a space there to work on the bike while he made parts – has had a relapse. :'(He can only work the odd day per week, which means I would have no daily access to the bike if it went up there- and it’s 20 minutes away.
And literally the same day I got the news, my old pal Brian [ also in remission from Cancer
] said that he had finally got his garage sorted out – and had a KZ750 sized space where I could work on it ! 10 minutes away! 
This is also the guy that used to build my replicas for his own clients AND was the UK agent for Russell hosing and had his own mobile workshop that he took along to Drag Race meetings ! He still has all his hosing tools and jigs etc, and even has boxes of fittings and the odd length of hose ! He is a meticulous [ almost anal ] worker and very good at wood patterns, which will be a big help when it comes to mocking up the blower , etc.
So, the plan C [ or is it D ?
] is to get the bike off the workbench in my shed – remove wheels and accessories and the move the whole project into his garage. In the interim, I’ll get my bike ramp cleaned up [ too dirty for his spotless garage ! ] and taken round there. THEN we can take the measurements for the wheel spacers etc and get the chassis truly rolling. First pal Dave will make the bits as promised – just have to wait until it’s one of his “good” days. If that’s not an option due to his health, I need to find another “friendly” machinist.Getting the bike bits and work ramp round to his garage ALSO clears space to assemble my Engine hoist and stand – then work can also get started in earnest on my supercharged 2.3 Volvo lump for my 940 wagon project !!

All in all feeling very positive, if a bit sad about my pal Dave’s relapse.</div>
</div>
</div>
<div class=”moderatorbar”></div>Norvil repro 1/2 fairing [ smoked screen ] – Nitrous bottle will sit horizontal in the fairing side above engine.

Eaton blower position – cardboard tube represents [ in best Blue Peter manner ] the intake plenum where the Nitrous Oxide fogger injectors will go.
-
This reply was modified 9 years, 1 month ago by
beachcomber. Reason: Add pix / info
-
This reply was modified 8 years, 11 months ago by
-
AuthorPosts











