beachcomber

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 384 total)
  • Author
    Posts
  • in reply to: Indulge me #23207
    beachcomber
    Participant

    Thanx EP – I’ll add relevant pix to posts as I go along. [ Yep that works ……………. Ta. ]

     

    By way of explanation, I am entitled to wear the Clan Crawford tartan. My maternal Grandmother was a Crawford [ born in Scotland ] and if you go far enough back in history Margaret Crawford married [ 1297 ] a certain Sir John Wallace – and their son was ………………. you guessed it – Mel Gibson.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #23204
    beachcomber
    Participant

    Got it sussed now KK, I’ll retrieve what pix I can from my own archives and gradually replace them in the posts so the posts makes more sense ……. if I EVER do make sense !!

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #23196
    beachcomber
    Participant

    I just noticed all my earlier posts have had the pix removed – thanx to Photophukit. I’ll add a few as I go along.

    Just a few random pix. The Eaton blower, The top fairing, high level 2 into 1 exhaust and the schematic for the external [ Gixer ] oil pump drive / turbo / oil cooler.

     

     

     

    in reply to: Unclean #23195
    beachcomber
    Participant

    Just got to grips with where I’m meant to be at with the sites!

    You’re welcome Lonesome – hope it got you out of the smelly stuff.

    Now the wedding is out of the way [ just my Daughter’s 50th in 2 weeks ! ] then my life is my own again.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #23192
    beachcomber
    Participant

    So, Daughter Shelby’s BIG wedding over now [ Saturday ], just my eldest’s 50th birthday in 2 week’s time – and then my life is back to normal and I can have some “me” time !

    The twin plug head is now ready [ thanx to KK ] and at the end of this month [ after birthday celebrations ] the bike IS coming off the bench and I can continue with the job of getting the chassis truly rolling. That is to say – wheel spacers etc. front and back to suit the Grimeca hub and the Borrani wire wheels.

    Definitely going towards 60’s style Cafe Racer style now – Tomaselli clip-ons dusted off and polished, Manx tank [ dummy cover ] and the 7R race seat all going on. The Manx dummy tank will house all the electrics, Nitrous controllers, switches, solenoids etc. , while the fuel tank [ reservoir ] will be UNDER THE ENGINE ! Yes ……….. imagine a GP style belly fairing [ upside down Toblerone shape ], and then imagine that as a fuel cell – simples eh?

    That means I have loads of space to hide all the ancillaries needed for the blower / nitrous. The 100bhp [ tee hee ] nitrous bottle will hide in the lower part of the top fairing.

     

    BTW – are we “here” now and not over “there” ?

     

     

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #4408
    beachcomber
    Participant

    Scrub that last request !!!

     

    Seems I have the “big” intake manifolds – and now I’ve checked I find they are spot on to use as a base for the intake from the blower. Two tubes will come off the intakes to a circular [ oval if I can find the material ] plenum which will then shoot off with two curved tubes to the blower outlet.

    I have now discovered an even more compact [ externally ] Eaton, with the same capacity. Checking that out now – if that works, that’ll leave me 2 to sell off !

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #4407
    beachcomber
    Participant

    Single carb manifold ???? Does one exist ?

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #4406
    beachcomber
    Participant

    While I was sitting twiddling my thumbs waiting for my pal to clear his work and get the chassis up for the machining etc., I decided to look again at the intake / exhaust as this will be the last opportunity until he has finished his part of the work.

    Anyone who followed the early embryonic Glemseck ideas, will remember that originally I wanted to use an Eaton blower. When I offered mine up [ 1 of 3 ], it was obvious that it was plain too big enough to fit without butchering the frame. Also – as I thought – the drive from the alternator side rotated the wrong way for the blower. Blower clockwise.

    Of course when I found out I was wrong about the engine rotation – I had already moved on to the idea of a turbo. I have never made a secret that I am not comfortable with turbos ! Yes, I KNOW all about the benefits – but I’m also aware of the drawbacks and having built 5 or 6 blown twins in the 60’s [ Shorrock ] that would be my preference.

    So, why bring it up? Well a blower I had already sold to a guy was returned to me as “the wrong one” – glad in a way as it was without doubt the best s/h Eaton I’ve owned. Absolutely NO snout play and excellent rotors.

    Since I had it back, I never even unpacked it [ 6 weeks ] – until today.

    “Well I’ll be blowed” [ forgive pun and insert your own expletive ] – ” It’s more compact than the other 2″.

    Whizz out to shed, remove exhaust and Weber and offer the blower up ……………….. yes, that’ll do nicely.

    At a stroke that relieves me of sorting out oil feed for turbo [ blower self contained ], and electronics / carb – and the main stumbling block, getting a turbo unit with the old school carbon seal. That will make the installation so much simpler, and relatively speaking the tuning set up far easier. Of course NO turbo lag, something I was a bit concerned with a twin – and boost from idle.

    As I was going to have to devise an oil pump drive for the GSXR oil pump anyway, I’m no worse off AND I’ve already got all the pulleys.

    One very happy Beachcomber.

     

     

     

     

    in reply to: Uprated progressive fork springs and clutch springs #4404
    beachcomber
    Participant

    Somebody want to send me a sample clutch spring ?

    I’m getting 5 sets made for myself [ 1 x TD , 1 x Glemseck and 3 spare sets for Glemseck ].

    These will be 30% stronger than stock, and 10% more than the Barnett ” Hi Performance” items.

     

    If there is any interest before I pull the trigger on these I can add to the order. Has to be in increments of 5 sets to keep the prices right.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #4403
    beachcomber
    Participant

    Well the move didn’t go as planned !

    My pal has a major rush job for his main customer – has to be done. Looks like at least another 3-4 weeks.

    In the meantime, the twin plug head conversion has been completed and I can’t wait to get my hands on it !

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #4391
    beachcomber
    Participant

    So, I can get back to my projects now.

    The good news is that on a recent visit to my old workshops to see my pal that took it over, he volunteered to have the KZ up there while he made various spacers, fab, etc. He makes parts for a couple of major classic car parts suppliers and has all the relevant machinery and skills to sort out my odd jobs.

    First job will be making the spacers to fit the front and rear Borrani wheels so that the rolling chassis can truly be “rolling” ! Might even be able to get the high level exhaust system fettled and at the very least – tacked.

    Plan is to get the bike up there at the end of the month [ he has a big job to complete ] and work can begin to take me to the finishing straight.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #4390
    beachcomber
    Participant

    Thanx for the encouragement Lonesome !

    Wiring and gearboxes – my two biggest “hates”.

    That said, I have designed and knitted a loom for one of my Drag Race cars, which involved 3 stage Nitrous Oxide with various rev, ignition and retard controllers! Didn’t particularly enjoy it, but there was a sense of satisfaction when it all worked !

    The Tangerine Dream road bike will be relatively straightforward with “delete” issues. The Glemseck machine will involve various engine management wiring / controllers.

    in reply to: "Glemseck" [ and maybe "Tangerine Dream" ] #4384
    beachcomber
    Participant

    Update – my pal has now had his major surgery to remove asbestosis, tumor and re-inflate his lung !

    9 1/2 hours on the operating table, and the procedure was a 90% success. The surgeons could not remove all the asbestosis due to the fact the lung wall was too badly damaged in one area.That means there is a small chance that a tumor will form in the future.

    I’m no longer doing the 40 mile round trip twice a day [ ! ] to take his wife to visit – but he needs a lot of homehelp during the next 9 weeks [ at least ] of recovery ].

    It was great fun moving his sleeping accommodation from the third floor of his house to the ground floor !

    So I can now get back to my KZ project [s ].

    Next task is to check out the stock wiring loom to see if I can simply modify it or whether knitting a new loom is the answer. As I’m running daylight MOT [ no lights – ‘ish ] ] and deleting other controls it should be greatly simplified.

    Then it’s take the project off the bench and into the garage on the bike ramp – that will leave the space in the shed to get the “Glemseck” engine sorted and packaged with the turbo, Nitrous, etc.

     

    • This reply was modified 9 years, 5 months ago by beachcomber.
    in reply to: Newbie #4382
    beachcomber
    Participant

    Hi Rick, nice history and a great colour !

    • This reply was modified 9 years, 5 months ago by beachcomber.
    in reply to: Glemseck – thinking aloud #13806
    beachcomber
    Participant

    If only !!!!

    Taken yet another backseat for a while.

    This time due to a dear old friend’s battle with cancer. I’ve been looking after him and his wife – trips to hospital, visitor’s taxi, etc,etc.for the past 8 weeks or so.

    I am also posting on the new site, and trying to remember to duplicate postings.

    My pal has just undergone his final major [ 9hrs surgery ] op, and I have one or two more weeks running his wife back and forth for hospital visits. She doesn’t drive – 40 mile round trips.

    Once he’s back home, I’ll be able to get back to my projects !!

    Thanx for your continued interest.

Viewing 15 posts - 61 through 75 (of 384 total)