Forum Replies Created
-
AuthorPosts
-
beachcomberParticipantI’ve ordered one of those Brass vin plates from India – we’ll see.
Now then, having trouble deciding on the colour for the “tins”.
I KNOW this isn’t usual “Classic” / Restorer fodder – but I’m hoping there may be someone out there with good colour co-ordination !
Yellow is getting the nod on one of my other forum / club threads. Maybe with some white.
I have a very violent Yellow I painted one of my 356 Speedster replicas, but a Paler shade I did a customer car in is also getting attention.
Any offers ?
beachcomberParticipantExactly the same Michael – the plate on it’s own would not be legal for an OEM bike.
However, the original stamped # is unmolested and will be underneath the plate – if I go that direction.
My BMW Kays have a stamped number on the lower frame tube – and a riveted plate on the headstock.
beachcomberParticipantThat’s a good option Michael.
Plan B – I found a place in India that makes brass generic chassis plates to stamp / engrave yourself.
Their text [ “Quote Chassis Number” ] is nicely embossed and you then simply stamp / engrave your OEM number in the blank space.Options at least.
beachcomberParticipantKK ….. thanx for getting my grey cells working !
How’s about spraying in silver / alloy finish – so it looks LIKE a metal tag !Even drill a couple of holes and put some blind rivets in.
beachcomberParticipantAT LAST ……. collected the powder coating this morning. Most of the parts for the KZ and a few parts for my TR1 Cafe Racer [ Black bits ].
Well pleased ….. except, they very kindly masked off the frame number – so that is original bare metal !!
Not sure if I should rattle can it or put an alloy plate over the top.
The bad news is they say they can now NOT pc the wheels without being stripped [ bearings out etc. ]. I’ve got a pal with gas welding kit [ need some heat ], so I’ll run them down to him to get the spindle out.
Need to pull my finger out now and get the parts for Gold passivating off to the workshop – that includes the engine plates, bolts and spindles.
beachcomberParticipantPhil,
do you remove the rocker box prior to fitting as it states in the manual ??
I’m not at that stage yet, but when I do – I don’t want to damage my freshly powder coated frame !
beachcomberParticipantWiring loom issue now sorted out – thanx to Philpass.
beachcomberParticipantMany thanx to Philpass of this parish – now sorted,
many thanx for the feedback
beachcomberParticipantDelays on powder coating as their oven packed up at the weekend !
However, all promised for next week and then – new pix !!
I now have a second man set up for Weber manifold fabrication, so hope to have that underway soon.
beachcomberParticipantThanx both.
next to gearboxes, wiring is my least favourite part of any rebuild, but I have to bite the bullet sometime !
I’ll await your “search” – no rush
beachcomberParticipantMichael – more of a cultural / language misunderstanding which I SHOULD have been alert to !
When I spend any time at my place in Saxony I try very hard to use some German language. However all my friends speak very good English [ as usual ! ] and apparantly I speak what little German I have with a Saxony accent which has all my pals [ from the West and South ] rolling around with laughter.
However, from now on – no duplicated pix and “progress” reports.
beachcomberParticipant“Mellowed” is probably nearer the mark.
Believe me I’d LOVE to be in the garage more – but that requires bits, which requires funds.
That said, I am now at the point [ KZ ] where assembly can start soon [ when powder coating is back ].
As soon as the rolling chassis is up together I can concentrate on the outwork – Weber manifold, exhaust, seat upholstery, etc.
On the plus side – the KZ requires much less investment than my other 2 projects [ 3 if you include the Vanguard Estate Hot Rod ! ].
beachcomberParticipantWOW ………………….
OK – I post on several forums – Including dotheton.com. , which has one of the largest daily hits of any specialist bike site.
I write [ used to write for a living ] a thread recalling the early days [ Cafe Racers ] – “Beachcomber’s Tales from the Day” 54,000 views and 558 replies …..NEVER been accused of being boring. My KZ thread [ “Tangerine Dream” ]has over 11,000 views and 130 replies … however.
Yes Michael, I accept that with different cultures sometimes a comment [ especially when it’s not your first language ]can be misunderstood – I spend a lot of time at my place in Saxony and have many German friends – maybe I should have realised sooner !!
MY response was more a case of – I’ll report progress / post pix when there is something more positive to pass on.
However, posting up something as mundane as having the parts finally welded and everything prepped for powder coating IS progress to me [ “Progress Report” ] in readiness for the next stages. AND it gives me some sense or urgency to get things done. ALL of my projects are hampered by severe lack of funds, and at 70 years old – time is of the essence to get things completed.
As KK says – there’s always the “off button” option.
So ……. Michael, I accept your criticism, and quite often the senile dementure might kick in and I will post a picture twice, for which I apologise.
I WILL rein in my natural enthiusiasm and only post when something new / interesting comes along.
There – all good friends now?
beachcomberParticipantPoint taken Michael – colour me gone.
beachcomberParticipantThen I realised I’d left the old ball race cups in the headstock !!!
They’re in the bin now, while I was at it I took a pic of the seat / undertray mounts I had made and welded in.
Also found a few more parts to be PC’d – rear brake torque arm, rear caliper mount, fork yokes definitely Red now to match frame.
Fork bottoms ???????? Red or polished ? I’m erring towards Red with the Gold wheels.At least I feel like some progress is being made – I guess when all the lovely Red bits are back that will give me the kick up the ‘arris I need.
Anyone seen any of those off road / scrambler oval number plates that don’t require a second mortgage ? -
AuthorPosts
