Forum Replies Created
-
AuthorPosts
-
beachcomberParticipantThanx KK – it’s polishing for the housing then !
Both hubs have now been thoroughly degreased and prepped for powder coating next week – can’t wait.
Thanx for the timely reminder re: bearing alternates.
I did a similar exercise a few years back when I wanted a camshaft bearing conversion [ stock runs in alloy housing ]for my Yam TR1 Cafe Racer.
Yamaha “specialists” – £15 each – general bearing stockholder – £4.95.
beachcomberParticipantNo pressure then !!!!!!!!!!!!!
beachcomberParticipantThanx to all for your feedback and especially to KK for the generous offer ……………………..however, the spindle is now out !!!!!!!!!
Wheels off to be blasted / powder coated later this week.
beachcomberParticipantI was tempted !!!! But I’d already ordered a complete set of wheel / fork / stem bearings / seals.
I bought new sprockets last year, but I’m in need of a chain – most economical source ?
A question for you guys who WILL know. I will be getting the oil breather [ ? ] housing off shortly for refurb. Is it alloy or steel ?
That will determine polished or Gold passivated finish – ta.
I think the wheel solution is the breakthrough now, I was getting somewhat bogged down and disconsolate before Christmas !
beachcomberParticipantRESULT ………………. front wheel spindle now removed – courtesy of a big engineering vice and a 6′ breaker bar !
Many thanx KK for the kind offer of alternate parts.
Again, as the PO said – the bearings are as new.
No excuses now, wheels off to be blasted and powder coated this week.
beachcomberParticipantI hope to test out the flake in the next 2 weeks. Just need to get my new “workshop” weather tight ! At least the roof panels didn’t blow off last night.
Apparently [?] modern flake is a plastic material – as are the samples I have – so, theoretically [ and we know how that works ! ]it should be the same method of application.
Rear wheel bearings are now removed, courtesy of pal, and yes the wheel bearings are as new – AND have been removed without damage.
Front wheel off to a local machine shop next week – if that fails I have an offer from KK to save the day !
beachcomberParticipantHere’s the Mini-Flake samples I ordered. I’ll paint up a few sample panels as soon as the weather brightens / I get my new “workshop” weather-tight !
beachcomberParticipantHI KK,
can’t see how to PM you.
I could do with price for the wheel and disc. And also for the complete set up including forks.
My pal is having one more go at removing the spindle from my wheel. He’s taking it in to his mate’s workshop at the weekend.
beachcomberParticipantMany thanx for that.
Seems like I will need the complete set up – wheel, disc and possibly caliper.
I’ll check the diameter tomorrow [ dog at vets today ]and let you know.
My pal is having one more go at removing the spindle from the wheel I have.
thanx again.
beachcomberParticipantIs your wheel the same as the one pictured ?
I was told it wasn’t the correct one for my bike [ 19976/77 ] ??????
beachcomberParticipantThe paint cans I ordered have arrived now – together with the “mini-flake” samples.
I just ordered some random colours to make certain they would work in a clear lacquer suspension.
One of the colours is a Pale Yellow” !!! Could be the one …………….
beachcomberParticipantYou’re a star, many thanx
beachcomberParticipantnow sorted thanx
beachcomberParticipantfestive Greetings to all my new found pals here.
Thanx for all the help and advice – here’s to a healthy and happy New Year.
beachcomberParticipantMichael – been following your engine build – very useful – thanx.
OK – I have several rattle cans in various colours on the way to me that will hopefully help me to make a final decision colourwise !
The Brass vin plate arrived from India [ 1 week ! ] – spot on, very well made and just the right size. I’ll get the chassis number engraved on it then it’s ready to fit.
-
AuthorPosts
