- This forum has 16 topics, 66 replies, and was last updated 1 year, 7 months ago by
.
-
- Topic
- Voices
- Posts
- Last Post
-
- Rear brake lockup on 77 KZ750B I rebuilt the rear brake reservoir and caliper. When I did my first shake down ride, when I got hom…
- 1
- 1
- 1 year, 7 months ago
- Removing a stubborn headlight ear Must have internal Rudy buildup. Any ideas how I can free a stubborn headlight ear. Dont really wan…
- 2
- 9
- 3 years, 9 months ago
- How to change to Tax exempt Hi Wonder if anyone can help me confirm sufficiently in the dvla eyes the date of manufacture of my…
- 2
- 6
- 3 years, 10 months ago
- Repairing torn boots and hoses Here’s a trick I’ve used, most recently on a torn carb boot going from the airbox to th…
- 2
- 2
- 5 years, 5 months ago
- VM34 carb manifold Hi guys, I have installed VM34 carbs using steel intake manifolds built by Counter Balance Cycles. …
- 2
- 2
- 7 years, 9 months ago
- Front sprocket 18t Suzuki GSX 1400 front sprockets fit KZ750 B1s, The small chain guard needs to be removed, the c…
- 1
- 2
- 8 years, 2 months ago
- Like to see how carbs behave when riding a bike ? https://www.youtube.com/watch?v=IpYPCMFNq1M It is from a current thread out of the german http://ww…
- 3
- 4
- 8 years, 4 months ago
- Flywheel removal Remember the big bolt on the steering head? I replaced my old rusty one with a new one and by accid…
- 3
- 3
- 8 years, 5 months ago
- AIR VALVE SWITCH so im thinking of putting KN filters on doing away with the airbox as im going down the brat style …
- 3
- 4
- 10 years, 1 month ago
- Chain Tension Just had a thought, My chain needs a slight adjustment. But if I set the chain to have an inch of p…
- 2
- 2
- 10 years, 1 month ago
- fuel mixture in carbs Hi Lonesome Twins, as always some questions appear with carbs, I have modified a graphic, originall…
- 2
- 3
- 10 years, 7 months ago
- Pitted chrome I was given a tip about 6 months ago for tidying up pitted chrome. Today I tried it and I am quite …
- 3
- 3
- 10 years, 8 months ago
- caliper pistonpusher to push the piston back when bleeding the brakes. drill and tap a 6mm thread in an old fixed brake …
- 4
- 5
- 10 years, 9 months ago
- Camping on a Motorcycle Well I have a good tent But its a bit to large for the bike. I wanted a cheap Tent that is small en…
- 3
- 10
- 10 years, 10 months ago
- Removing the flywheel The fly wheel may need to be removed for several reasons. A common reason for our twins is to acces… 1 2
- 4
- 21
- 10 years, 10 months ago
- You must be logged in to create new topics.
