- This forum has 209 topics, 1,109 replies, and was last updated 11 months, 3 weeks ago by .
-
- Forum
- Topics
- Last Post
-
-
How To Fix It
Got a problem? Ask here, or answer someone elses problem if you can. Got a Tip? Tell us all and save us some time.
- 136
- 1 year, 2 months ago
-
Tips and Ideas
Do you know a tip for getting a job done? Are you struggling to remove that part? Share what you know and ask about what you don't
- 16
- 11 months, 3 weeks ago
-
How To Fix It
-
- Topic
- Voices
- Last Post
-
- Understand Engine Oil. I had been looking for what is the best oil for the Air cooled 750 Twins. I have been informed by M…
- 4
- 7 years, 10 months ago
- TWIN DISC SET UP? In the process of restoring a Z750 twin and would like to go for twin disc. my bike is a 1980 B3 or…
- 4
- 7 years, 10 months ago
- Fork Legs I found out the hard way Kawasaki went to 38mm forks in 1981 on KZ1000 bikes. Everything before tha…
- 1
- 7 years, 10 months ago
- B2 Tank Hi I have a 1978 B2 but the tank doesn’t fit properly. Looking underneath it has the peg that…
- 3
- 7 years, 10 months ago
- 1979 KZ750B4 Non-start It could be that the starter is drawing to much current causing the voltage to drop causing weak or… 1 2
- 4
- 8 years, 2 months ago
- Tachometer cable Hi, I ordered a tacho cable for my 78 twin and went to install it today but the male end that conne…
- 4
- 8 years, 6 months ago
- Interesting find at Wemoto They’re selling a kit to get the starter going for a ‘mere’ £78.50. Anyone got an…
- 3
- 8 years, 10 months ago
- Centre stand Can anybody let me know if the centre stand on the kz750b’s were all the same no matter what …
- 2
- 8 years, 12 months ago
- Rev Counter Ratio Wonder if you can help me? I’m fitting a custom mini rev couter to the bike and need to know …
- 3
- 9 years, 1 month ago
- Carb information from the USA http://wgcarbs.com/index.php/using-joomla/extensions/components/content-component/article-categorie…
- 3
- 9 years, 3 months ago
- G Model fork legs The G model fork leg is Kawasaki part No. 44013-1003 and is also used on these models: 1977 KZ1000-…
- 2
- 9 years, 3 months ago
- Thread Size? Hi Guys. Can anyone tell me the thread and pitch size of the threaded outlet of the fuel tank?
- 3
- 9 years, 8 months ago
- disc diameters diameter of front disc and same for rear please,
- 2
- 9 years, 8 months ago
- Big bore kits Has anyone fitted such and what, if any benefits are to be had – drawbacks too! Have any othe…
- 3
- 10 years ago
- Rattling side stand On a recent ride I noted that the bike was sounding noisier. The engine is a sweet as a nut so not …
- 2
- 10 years ago
- You must be logged in to create new topics.